Glass Beads for Road Markings: Surface Damage and Retroreflection Decay Study

Featured Application Reflectorisation of road markings with glass beads that are characterised by increased refractive index and simultaneously improved resistance to scratching was shown to be the most sustainable choice. Road markings must be reflectorised with glass beads to be visible to drivers at night, retro-reflecting light from vehicle's headlights, which is critical for road safety. Four commonly used types of glass beads were evaluated in a laboratory setting for retroreflectivity and their surfaces were analysed using optical and scanning electron microscopy. The glass beads were subjected to abrasion and a visual correlation was sought between the measured retroreflectivity and the surface damage. Scratching the glass bead surface with corundum in a rotary drum resulted in major differences in the rates of damage development, depending on the type of the glass beads, and it could be correlated with the rate of retroreflectivity decay. The relative results from abrasion testing were confirmed under tyre action during a turntable evaluation. Based on the outcomes of these tests, service lives, defined as maintaining appropriately high retroreflectivity, were predicted and used to calculate the consumption of raw materials-the basic sustainability parameter. It was shown that the use of 'premium' glass beads, enhanced with TiO2 and made in a proprietary process, provided the road marking system characterised by the lowest long-term consumption of resources.