Soft-Switching High Step-Up DC–DC Converter Based on Switched-Capacitor and Autotransformer Voltage Multiplier Cell for PV Systems

This article introduces a nonisolated, high step-up voltage multiplier cell (VMC)-based dc–dc converter for applications such as module-integrated converter and power optimizers. The VMC combines switched capacitor with autotransformer techniques and active clamp circuit. The autotransformer tertiary winding is employed to increase voltage gain without operating the main switch under extreme duty cycle condition, to reduce the current through the main switch before it turns off and to ensure its zero-voltage switching (ZVS) operation on a wide operation range. The auxiliary switch in the clamp circuit provides ZVS for the main switch and vice-versa. Thus, both switches are turned on with zero voltage and there is no switching loss. Hence, high switching frequency is used to reduce the passive components’ volume and weight. Besides, the low dc-bias and bidirectional magnetizing current allows a smaller magnetizing inductance in the autotransformer to further minimizing the dimensions of the magnetic core. The leakage inductances are used to provide zero-current switching condition for the diodes, eliminating their reverse-recovery losses. The operation principle, steady-state analysis, and design guidelines are depicted and validated through experimental results obtained from a 350-W prototype of the proposed converter. Efficiency of 96.5% at full load is also reported.