Performance characteristics of GMAW process parameters of multi-bead overlap weld claddings

IOP Conference Series: Materials Science and Engineering(2020)

引用 2|浏览0
暂无评分
摘要
Abstract The effect of Gas Metal Arc Welding process parameters on the bead geometry of stainless steel (SS) claddings can be studied using statistical Taguchi L9 design of experimental model. In this study deposits were made with continuously varying weld bead overlaps of 0 – 100%. Cladding is proposed to impart corrosion inhibition properties to the low carbon structural steel plate. Selection of welding process parameters affects the arc stability, heat input deposition rate and quality of the surfaced layer represented by the percentage dilution. Minimization of heat input leads the reduced deposition rate and increased occurrences of weld bead defects like porosity, lack of fusion and cracking. In this context, it is important to identify the extent of influence exerted by the controlled welding parameters on the bead geometry. The reinforcement dimensions play an important role in the cladding process. Stainless steel claddings are deposited by automated Gas Metal Arc Welding (GMAW) process by using Taguchi L9 design of experiment. The selected input variables are Welding voltage (WV), Wire feed rate (WFR), Welding speed (WS) and NTPD. The responses identified governing the bead geometry like bead width (w) and height of the reinforcement (h) in different bead overlaps like 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100%. The paper also explores the variation in the bead geometry at different levels of overlap percentages including hardness evaluation.
更多
查看译文
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要