Effect Of Aging Time On Crushing Performance Of Al-0.5mg-0.4si Alloy For Safety Components Of Automobile

The effect of aging time on the crushing performance of Al-0.5Mg-0.4Si alloy used for safety components of automobile was investigated by tensile test and crush test. Moreover, the microstructure of the alloy was investigated by transmission electron microscopy (TEM). The results show that the localized deformation ductility index, Delta A(abs), which is defined as the difference between total elongation and uniform elongation, of Al-0.5Mg-0.4Si alloy is 6.5%, 7.0% and 8.5%, respectively, after being aged at 210 degrees C for 1, 3 and 6 h, and this tendency is the same as that of the crushing performance. The spacing of grain boundary precipitates (GBPs) from TEM results are found to be 94.9, 193.6 and 408.2 nm after being aged at 210 degrees C for 1, 3 and 6 h, respectively, and this tendency is same to that of Delta A(abs). A mechanism about the relation between the spacing of GBPs and the ductility index Delta A(abs) has been proposed based on localized deformation around GBPs. With the increase of GBPs spacing, the Delta A(abs) increases, and the crushing performance is improved.